Part Number Hot Search : 
2N1794 ITS428L2 0805B10 09N20H 0261KFKR CEB02N7 M61113FP PCHMB
Product Description
Full Text Search
 

To Download Z8917500ZEM Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 CUSTOMER PROCUREMENT SPECIFICATION
1
Z8917500ZEM
ICEBOXTM FAMILY IN-CIRCUIT EMULATOR - 175
FEATURES
s
1
Supported Devices: Emulation1 Z89135, Z89165, Z89C65 Z89138, Z89175
s s s s
Selectable Baud Rates - 9600 to 57.6 Kbps Windows-Based User Interface RS-232C Connector HP Logic Analysis System Interface Connectors for Z8 and DSP Zilog Macro Cross Assembler (ZMASM) - Dual Processor Chips (Z8 and DSP) in Same Source File - Structured Assembly and Data Code - Source-Level Debug Support - Built-In Register Equates - Linker
Packages 68-Pin PLCC 100-Pin PQFP2 Notes:
1. Programming is not supported. 2. Requires optional, separately purchased emulator pod, EPP-100-QF06W, from Emulation Technology. Refer to the following section for address: "Additional Required Items Not Supplied". s
s
ICEBOX Emulator Provides Source-Level Debugging for both Z8 and DSP Cores. Symbolic Disassembly in the Debug Window
s
GENERAL DESCRIPTION
Zilog's ICEBOXTM in-circuit emulators are interactive, Windows-oriented development tools providing a real-time environment for developing and debugging software. Also included is a full-featured macro cross assembler to enhance programmer productivity when used in conjunction with the 175 ICEBOX. The ICEBOX provides a hardware platform that is a significant improvement compared to software simulators. The ICEBOX is faster in operation, making it more practical than software simulators for code development. The Z89175 ICEBOX Emulator, which supports the Z89XXX family of voice processing devices listed above, provides essential timing and I/O circuitry to simplify user emulation of the prototype hardware and software product. The Z89175 ICEBOX Emulator can be connected to a serial port (COM1, COM2, COM3, and COM4) of the host computer, and it uses Graphical User Interface (GUI) software.
CP97TAD0002
1
Z8917500ZEM In-Circuit Emulator - 175
Zilog
SPECIFICATIONS Operating Conditions
Operating Temperature: Supply Voltage: Operating Humidity: Minimum Emulation Speed: Maximum Emulation Speed: 20C 10C +5 VDC 5% 10-90% RH (non-condensing) 20.480 MHz 29.4912 MHz
Power Requirements
+4.75 VDC to 5.25 VDC (+5 VDC @ 1.2A typical, 1.5A max.)
Dimensions
Width: Length: Height: 6.25 in. (15.8 cm) 9.5 in. (24.1 cm) 2.5 in. (6.35 cm)
(shipped with 20.480 MHz and 24.4912 MHz crystals) Maximum Emulation Memory: Emulation Processor: 32K Z8915520FSC
Serial Interface
RS-232C @ 9600, 19200 (default), 28800, or 57600 Baud Rates
Maximum Hardware Breakpoints: 32K
HOST COMPUTER Minimum Requirements
IBM PC (or 100-percent compatible) 386-based machine: - - - - - - - - 33 MHz 4 MB RAM VGA Video Adapter Hard Disk Drive (3.0 MB free space) 3.5-inch, High-Density (HD) Floppy Disk Drive RS-232C COM Port Mouse or Pointing Device Microsoft Windows 3.1 The following changes to the Minimum Requirements are recommended for increased performance: - - - - - - - 486- or Pentium-based machine 66 MHz (or faster) 8 MB of RAM (or more) SVGA Video Adapter Color Monitor Printer Microsoft Windows 95
2
CP97TAD0002
Zilog
Z8917500ZEM In-Circuit Emulator - 175
KIT CONTENTS
Qty. 1 Item Z89175 ICEBOX Emulator Host Software - Z8 GUI Diskette - Zilog Macro Cross Assembler Diskette Documentation - The Z89175 ICEBOXTM Emulator User's Manual - Zilog Macro Cross Assembler User's Manual - Software License and Limited Warranty Agreement - Registration Card (2)
1
Cables/Pods 1 1 1 1 68-Pin PLCC Pod and Cable 100-Pin PQFP Emulation Pod Power Cable RS-232C Serial Cable
ADDITIONAL REQUIRED ITEMS NOT SUPPLIED
s
A source of power (+4.75 VDC to +5.25 VDC Max [+5.0 VDC typical]) for the emulator. This can be a laboratory power supply with supply current of 1.5A. To emulate the Z89175 and Z89176 devices, which are offered in the 100-pin PQFP packages, the emulator pods, which provide the physical connection to the target system, must be purchased from: Emulation Technology 2344 Walsh Ave., Bldg. F
s
Santa Clara, CA 95051-1301 FAX: 408-982-0664 TEL: 408-982-0660 Your Target Design Typically, this is a wire-wrapped or printed-circuit prototype that includes a socket for the target device, into which you can plug the emulation cable from the emulator.
s
OPTIONAL ITEMS NOT SUPPLIED
s
25-pin to 9-pin RS-232C Adapter
s
HP Logic Analyzer Kit (Z89C00000ZHP or ZINVASM0ZHP)
(c) 1997 by Zilog, Inc. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Zilog, Inc. The information in this document is subject to change without notice. Devices sold by Zilog, Inc. are covered by warranty and patent indemnification provisions appearing in Zilog, Inc. Terms and Conditions of Sale only. ZILOG, INC. MAKES NO WARRANTY, EXPRESS, STATUTORY, IMPLIED OR BY DESCRIPTION, REGARDING THE INFORMATION SET FORTH HEREIN OR REGARDING THE FREEDOM OF THE DESCRIBED DEVICES FROM INTELLECTUAL PROPERTY INFRINGEMENT. ZILOG, INC. MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. Zilog, Inc. shall not be responsible for any errors that may appear in this document. Zilog, Inc. makes no commitment to update or keep current the information contained in this document.
The software described herein is provided on an "as is" basis and without warranty. Zilog accepts no liability for incidental or consequential damages arising from use of the software. Zilog's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to such intended use is executed between the customer and Zilog prior to use. Life support devices or systems are those which are intended for surgical implantation into the body, or which sustains life whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Zilog, Inc. 210 East Hacienda Ave. Campbell, CA 95008-6600 Telephone (408) 370-8000 FAX 408 370-8056 Internet: http://www.zilog.com 3
CP97TAD0002
Z8917500ZEM In-Circuit Emulator - 175
Zilog
4
CP97TAD0002


▲Up To Search▲   

 
Price & Availability of Z8917500ZEM

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X